| Product Name and Description |
Usage Rate |
Packaging |
|
Wacker OH100 - extremely effective consolidating agent for
most types of masonry and brickwork, based on silicic acid ethyl
esters. Can be used on general architecture, walling and individual
statues.
|
Highly variable depending on the porosity of the substrate
(0.5 to 10 litres/sq.m.) |
5litre and 25litre
|
|
ACS 290 Water Repellent – a ready to use solvent based,
alkaline resistant water repellent for new work and repointing applications.
Ideal water repellent for use with Wacker OH100.9
|
Variable depending on the porosity of the substrate
(0.5 to 4 litres/sq.m.) |
5litre and 25litre |
|
ACS Universal Water Repellent (for masonry and wood) - a
specially formulated water-based, ready to use water repellent for
both timber and masonry. Suitable for use on interior and exterior
surfaces.
|
Variable depending on the porosity of the substrate
(1.0 to 6 litres/sq.m.) |
5litre and 25litre |
|
Wacker Crème C – an aqueous, solvent free, creamy
silane based water repellent for impregnating both normal and reinforced
concrete
|
Up to 400g/sq.m. |
200 litres
|
|
ACS Surface Binder – a concentrated, water dilutable
microemulsion based on silanes and siloxanes for stabilizing interior
masonry such as brick, stone and render.
|
Up to 4sq.m/litre/coat |
1,2.5, 5 and 25 litres concentrate (I:9 dilution) |
|
Boracol 10RH – HSE approved, ready to use surface biocide
to eradicate and inhibit organic growth (algae, moulds) on external
surfaces
|
4 to 8sq.m/litre/coat depending on substrate porosity |
5litre and 25litre |
|
ACS Mould Wash Concentrate – HSE approved water dilutable,
surface biocide concentrate for amateur and professional use against
mould fungi, mosses and algae on internal and external surfaces
|
1 litre diluted product per 10 – 12sq.m of surface |
250ml concentrate
|
|
ACS Graffiti Shield – a permanent, non-sacrificial
coating, which allows for repeated easy removal of graffiti. A water
vapour permeable, clear coating for external use that will not essentially
alter the aesthetic appearance of the protected surface. Available
in Gloss or Matt Finish.
|
8 to 10sq.m/litre/coat depending on substrate porosity |
5 litres |
|
ACS Graffiti Shield Non-Darkening Sealer – a clear,
water based primer sealer concentrate for on porous substrates prior
to the application of Graffiti Shield.
|
8 to 10sq.m/litre/coat depending on substrate porosity |
5 litres (diluted 1:1 with water) |
|
ACS Masonrycote Hi-Life Silicone Resin Paint – a durable,
water based smooth masonry paint finish combining both excellent
water repellence and water vapour permeability. Contains a biocide
for the sole purpose of protecting the paint from organic growth
in the can and the applied paint film.
|
8 to 10sq.m/litre/coat depending on substrate porosity |
5 litres |
|
ACS Masonrycote Hi-Weather Primer- a water dilutable, solvent
free microporous priming system for porous and friable surfaces
prior to the application of ACS Masonrycote Hi-Life Silicone Resin
Paint
|
Up to 4sq.m/litre/coat |
5 litres
|
ACS products are guaranteed against defective materials and manufacture
and sold subject to our standard Terms and Conditions of Sale, copies
of which are available on request.
Instructions for the use and handling of individual products are included
on each container label. Details for specific applications are given in
the appropriate Technical Data Sheets. Further advice and guidance is
available, if required, from the Technical Department.
HEALTH AND SAFETY - ALL PRODUCTS SHOULD BE HANDLED WITH CARE AND PARTICULAR
ATTENTION PAID TO THE PRECAUTIONS ON THE INDIVIDUAL CONTAINERS AND SAFETY
DATA SHEETS (SDS).
This information given in good faith is based on many years of experience
and usage. However, all recommendations are made without guarantee since
the conditions of use are beyond our control.
.
Go Direct to Order Page
|
